Latest update 03-06-2017,

Huawei Y6 Pro Charging Problem Solution Charging Ways

It is also among the problems that need to be addressed immediately as your phone will only sit atop your table when it totally depletes its battery.This post serves as your troubleshooting guide in case your Huawei Y6 Pro won’t charge. 

Huawei Y6 Pro Reasons of Problems:

Make jumpers from broken prints to their corresponding components and your phone will hopefully start charging again.

Connection in the phone might be broken.

If you have damaged the Huawei Y6 Pro USB charging connector prints, I have marked charging connectorjumper ways in the next. The phone could be water damaged.
Dust particles might be present in charging connector.
Your charger might be faulty.
 Good Luck

Huawei Y6 Pro Hardware Solution:

Check the charging (+) and (-) line paths are short using a multimeter, if it shows short them, remove/replace the diode, capacitors, and filters. also, replace the fuse.

Before doing, Be sure to check the battery and charger are Exactly working condition. then verify the phone’s USB pin connector is broken or any fault.

Note: use these work at your own risk.Check all the components shown in the image below.

Note:

We are not responsible if any harm comes to your device during the repairing process.

Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk.