Lenovo A1010a20 Charging Problem Repair Solution

The smartphone is equipped with a 4-core processor MT6580m clocked at 1.3 GHz, 1 GB of RAM and permanent memory capacity of 8 GB. Increase space available for data storage can be due to a memory card up to 32GB. Graphic video processor – Mali 400.

By modern standards, the smart phone is compact enough. It is equipped with 4.5-inch display with a resolution of 854 x 480 pixel

So if you are experiencing any charging problem or problem connecting your Lenovo A1010a20 Charging Solution USB Jumper to your computer via USB cable then it is possible that your Lenovo A1010a20 charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.

First, check the fuse if open or damaged, the second check the diode if shorted. Check the resistor near the power IC. Resolder or replace if damaged. Trace the CHARGE (charging voltage) line paths and the ground of the charging pads.

Bent, broken or pushed in connectors on the device or battery.
The phone is defective.
Damaged battery.
Defective charging unit or cable.
Temporary phone problem.
The phone is defective.

Resolving Lenovo A1010a20 charging problem:

  1. Normally Huawei Honor 4X charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to:
  2. Remove Battery cover, Battery and C cover, then check charging connector’s pins
  3. First Clean and remount all the pins of charging connector.
  4. Put Battery in again and connect the charger.

Post a Comment

Previous Post Next Post

Contact Form