Samsung Galaxy J1 J100ML Charging Problem Solution Ways

Samsung Galaxy J1 J100ML Charging Problem Solution Ways.and this is mainly because of the fact that a little bit of physical damage or water damage to the charging connector pin is enough to trouble with your phone’s charging connector. 

Reasons of Problems

1. Charger might be faulty.
2. Charging connector / pin might be faulty or is dirty.
3. Charging dock strip is faulty.
4. Phone might be water damaged, hence damaging the charging dock / charging pin.
5. There are also chances that phone’s battery might be faulty.
6. Uneven voltage at different points on charging dock.
7. Any of the components or capacitors might be damaged or short.
8. Power IC could also be faulty, hence forbidding your Samsung Galaxy Note N7000 to get any charge.
9. Battery pins could be rusty or damaged.

Now check the voltage of 1st pin (from right) of charging connector with the help of a Multi-Meter, if there is a problem then re-solder charging pin.

Now check voltage at the capacitor, if it is zero then check whether it is short or not if it then changes the capacitor. If not then:

Problems
Not charging.
Samsung Galaxy J1  heats up during charging.
No response when charger is connected.

Check the connection between charging pin and Capacitor, if the connection is broken re-solder it or place a jumper.

Hardware solution Picture Bellow:

The charge is provided to the Samsung Galaxy J1 J100ML board via Capacitor.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones.