Xiaomi Redmi 6A Official Stock Firmware File Download

Xiaomi Redmi 6A Official Stock Firmware File Download

Thank you for visiting our website techbugbh.blogspot.com. The firmware file that we are going to provide is Android OS based firmware (Xiaomi Redmi 6A Official Stock Firmware File Download). Xiaomi Redmi 6A comes with Android OS.

About Xiaomi

Xiaomi Corporation is a Chinese electronics coampany headquartered in Beijing. Xiaomi makes and invests in smartphones, mobile apps, laptops, and related consumer electronics.
 

Xiaomi Redmi 6A

How To Install The Flash File Full Guide:-
Charge your device: Before you proceed, you are recommended to ensure that your device is at least 50% charged.
PC: To install the flash file, you need a PC or Laptop.
Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the below given required files on your PC.

Fastboot Method

1. Download the MIUI xxx Fastboot ROM for your Xiaomi devices
2. Now turn your device off completely. Press the Volume– key and the Power button simultaneously to enter Fastboot mode.
3. Once you have entered fastboot mode, you will see the Mi Bunny Fastboot mode picture.
4. Now connect the device to the Windows PC/laptop via a micro USB cable.
5. You need to double click on the downloaded ROM file to extract it.
6. Open the extracted ROM folder, and copy its path on the computer.
7. To install Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash tool on your computer.
8. Now click on the installer file on your computer and continue the installation. (Ignore the security warning) and select run to continue the installation.
9. After installation is completed, open MiFlash.exe and paste the address bar from the ROM file folder path copied in the 6th step. (You can also browse the folder by tapping the Select button).
10. If you have pasted the Address code, Now Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
11. Your flashing process has started, Now Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.

Recovery Method

1. First of all, To Install via Recovery, you need to download Recovery ROM
2. Now connect your Xiaomi device to PC and copy the downloaded file to the downloaded_rom folder in your Internal Storage.
3. Launch ‘Updater‘ app in your device.
4. Click on the three dots (‘...’) at the top-right corner, and select the ‘choose update package‘.
   now press OK to start the flashing process.
5. Done. Your device will reboot after the flashing is done.

Xiaomi Mi Flash tool Download Link
Xiaomi USB Drivers

Check Our Last post On-  Xiaomi Mi 8 SE Official Stock Firmware File Download
Check Our Other post On-  Xiaomi Redmi S2 (Redmi Y2) Firmware File Download
Check Our Other post On-  Xiaomi Mi Mix 2S Official Stock Firmware File Download
Check Our Other post On-  Xiaomi Redmi Note 5 Official Stock Flash Download
Firmware Download Link(Recovery ROM)
 •Warning: The Firmware file is only for the Xiaomi Redmi 6A, Don’t try this file on any other device, It may brick or damage your device we will not be responsible for that.

•Important Suggestion: If your problem not solved by given solution you can write in comments we will try best to fix as soon as we can.